- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Fully ruggedized, active cladding alignment fusion splicer, with core sensing loss estimation technology to provide an accurate assessment of splice loss. With Warm Splice Imaging (WSI), it determines the accuracy of core alignment by evaluation of the splice during the heating process. The cleaver tracks usage and enables automated blade rotation.
Fully ruggedized, active cladding alignment fusion splicer, with core sensing loss estimation technology to provide an accurate assessment of splice loss. With Warm Splice Imaging (WSI), it determines the accuracy of core alignment by evaluation of the splice during the heating process. The cleaver tracks usage and enables automated blade rotation.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Enabled by Warm Splice Imaging (WSI), the fusion splicer can determine the accuracy of core alignment by evaluation of the splice during the heating process. This technology delivers splice loss estimates with a greater level of accuracy, and the state-of-the-art cleaver management via Bluetooth connection tracks usage and enables automated blade rotation as needed. The dual-camera, active V-groove alignment system provides consistent splicing performance in the most challenging conditions.
A 6-second splice time and 25-second shrink time offers unmatched speed and productivity, while an easy-to-use touchscreen monitor provides simple and intuitive menu navigation. Interchangeable sheath clamps or fiber holders provide versatility for user preference and compatibility with fusion installable connectors. The extended-life battery is rated for up to 200 splice and heat cycles, and long-life electrodes, lasting 5000 splices, help minimize downtime for replacement and stabilization. The large 5" monitor provides a crystal clear image, even in the brightest sunlight.
Features
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) |
| Cladding Diameter | 125 μm |
| Coating Diameter | 250 μm up to 3 mm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0.03 dB (SM), 0.01 dB (MM), 0.05 dB (DS) and 0.05 dB (NZDS) |
| Splicing Time | Typical 6 sec with SM |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | Total 100 splice modes |
| Splice Loss Estimate | Determined with cladding or core alignment based on method selected by the user |
| Storage of Splice Result | 10,000 splice results |
| Fiber Display | 5" TFT color LCD with X or Y view or both X and Y view simultaneously |
| Magnification | 200x for single-camera view and 132x magnification for dual-camera view |
| Viewing Method | 2 axis CMOS camera |
| Operating Condition | Altitude: 0 to 16,404.2' (0 to 5000 m) above sea level Temperature range: 14 to 122°F (-10 to 50°C) Humidity: 0 to 95% RH, non-dew |
| Mechanical Proof Test | 1.96 N |
| Tube Heater | 30 heating modes |
| Tube Heating Time | Typical 25 sec with FP-60 (60 mm) sleeve |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with BTR-11A |
| Electrode Life | 5000 splices |
| Power Supply | Auto select from 100 to 240 V with AC adapter, 14.8 V DC with installed battery |
| Terminals | USB 2.0 |
| Wind Protection | Maximum wind velocity of 15 m/s (34 mph) |
| Dimensions | 5.26 x 7.91 x 3.11" (131 x 201 x 79 mm) |
| Weight | 2.85 lbs (1300 g) with battery |
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) |
| Cladding Diameter | 125 μm |
| Coating Diameter | 250 μm up to 3 mm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0.03 dB (SM), 0.01 dB (MM), 0.05 dB (DS) and 0.05 dB (NZDS) |
| Splicing Time | Typical 6 sec with SM |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | Total 100 splice modes |
| Splice Loss Estimate | Determined with cladding or core alignment based on method selected by the user |
| Storage of Splice Result | 10,000 splice results |
| Fiber Display | 5" TFT color LCD with X or Y view or both X and Y view simultaneously |
| Magnification | 200x for single-camera view and 132x magnification for dual-camera view |
| Viewing Method | 2 axis CMOS camera |
| Operating Condition | Altitude: 0 to 16,404.2' (0 to 5000 m) above sea level Temperature range: 14 to 122°F (-10 to 50°C) Humidity: 0 to 95% RH, non-dew |
| Mechanical Proof Test | 1.96 N |
| Tube Heater | 30 heating modes |
| Tube Heating Time | Typical 25 sec with FP-60 (60 mm) sleeve |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with BTR-11A |
| Electrode Life | 5000 splices |
| Power Supply | Auto select from 100 to 240 V with AC adapter, 14.8 V DC with installed battery |
| Terminals | USB 2.0 |
| Wind Protection | Maximum wind velocity of 15 m/s (34 mph) |
| Dimensions | 5.26 x 7.91 x 3.11" (131 x 201 x 79 mm) |
| Weight | 2.85 lbs (1300 g) with battery |
