- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Measures inductance, capacitance, and resistance quickly and precisely, as well as impedance, Theta, and ESR. It offers 4-terminal configuration, basic measurement accuracy up to 0.1%, test frequencies up to 100 kHz, selectable test signal levels, and measurement rate.
Measures inductance, capacitance, and resistance quickly and precisely, as well as impedance, Theta, and ESR. It offers 4-terminal configuration, basic measurement accuracy up to 0.1%, test frequencies up to 100 kHz, selectable test signal levels, and measurement rate.
Fast auto ranging and quick measurement configuration such as measurement parameter and test frequency selection make these meters very simple to operate. The meter also includes handy functions such as data hold, Min/Max/Average recording, tolerance sorting, and relative mode. Measurement data can continuously transfer to a PC via the meter's mini USB interface, using either the provided data logging software or SCPI commands sent from a custom program.
Features
ESR measurements
Ability to measure the ESR (Equivalent Series Resistance) of capacitors. ESR is the sum of in-phase AC resistance of a capacitor and used to rate a capacitor's quality. An ideal capacitor would be lossless and have an ESR of zero. A capacitor could measure the correct capacitance value, yet still be defective, due to the component's excessive in-phase AC resistance. It would be able to detect this faulty component.
Flexible operation
A tilt stand provides position flexibility for viewing and operating the meter. The over-molding rubber case protects the meter for better durability. A single 9 V battery (16 hours with alkaline battery) or the included 12 V power adapter can be used to power the meter, giving the user options for portable or bench-top use. It includes a rechargeable Ni-MH battery that can provide up to six hours of battery life.
Four-terminal shielded configuration
Provides a 4-terminal socket with separate sensing and current leads plus guard terminal, a configuration typically only found in bench LCR meters. When using the included 4-terminal Kelvin test leads, this configuration can reduce the effect of lead impedances and contact resistance. This minimizes measurement errors and improves accuracy especially in the lower impedance range.
Faster auto range
The advanced auto range circuit design allows for faster measurements without the need to manually select ranges.
Dual display
The dual display allows multiple measurements to be conveniently displayed at once.
Auto detect mode
With the push of a single button, the Auto detect function will automatically identify primary parameters L, C or R and related secondary parameters, and set the suitable series/parallel equivalent mode and range.
Applications
| Measurement Parameters | L, C, R, Z, D, Q, θ, ESR and DCR |
| Test Frequency Setting | 100 Hz,120 Hz, 1 kHz, 10 kHz, 100 kHz |
| Actual Frequency (±0.02%) | 100 Hz, 120.048 Hz, 1 kHz, 10 kHz, 100 kHz |
| Tolerance Mode | 1%, 5%, 10%, 20% |
| Backlit Display | Yes |
| Test Signal Level (Typical) | 0.3 Vrms, 0.6 Vrms, 1 Vrms DCR signal: 1 Vdc |
| Measuring Circuit Mode | Series mode/Parallel mode |
| Basic Accuracy | 0.1% |
| Ranging Mode | Auto |
| Measuring Terminals | 3-terminal, 5-terminal with sockets |
| Measurement Rate | LCRZ: 4 readings/sec (fast), 1.5 readings/sec (slow) DCR: 3 readings/sec (fast), 2.5 readings/sec (slow) |
| Response Time (Typical) | 680 ms |
| Auto Power-Off | 5, 15, 30, 60 minutes, none |
| Operating Temperature | 32 to 104°F (0 to 40°C); ≤90% RH |
| Storage Temperature | -4 to 104° F (-20 to 50°C); 0 to 90% RH |
| Low Battery Indication (Typical) | 6.8 V |
| Battery Life (Typical) | 16 hours using alkaline battery (at 1 kHz with 100 Ω DUT, backlight off), 6 hours using Ni-MH |
| Power Consumption (Typical) | 28 mA (under full power battery) for operation/11 μA after power-off |
| Power Requirements | 9 V battery or ext. AC adapter: DC 12 Vmin to 15 Vmax (load 50 mA minimum) |
| Dimensions | 7.5 x 3.5 x 1.6" (190 x 90 x 41 mm) |
| Weight | 0.767 lbs (348 g) without battery |
| Safety | EN61010-1:2001, EU Low Voltage Directive 2006/95/EC |
| Electromagnetic Compatibility | Meets EMC Directive 2004/108/EC, EN61326-1:2006 |
| Measurement Parameters | L, C, R, Z, D, Q, θ, ESR and DCR |
| Test Frequency Setting | 100 Hz,120 Hz, 1 kHz, 10 kHz, 100 kHz |
| Actual Frequency (±0.02%) | 100 Hz, 120.048 Hz, 1 kHz, 10 kHz, 100 kHz |
| Tolerance Mode | 1%, 5%, 10%, 20% |
| Backlit Display | Yes |
| Test Signal Level (Typical) | 0.3 Vrms, 0.6 Vrms, 1 Vrms DCR signal: 1 Vdc |
| Measuring Circuit Mode | Series mode/Parallel mode |
| Basic Accuracy | 0.1% |
| Ranging Mode | Auto |
| Measuring Terminals | 3-terminal, 5-terminal with sockets |
| Measurement Rate | LCRZ: 4 readings/sec (fast), 1.5 readings/sec (slow) DCR: 3 readings/sec (fast), 2.5 readings/sec (slow) |
| Response Time (Typical) | 680 ms |
| Auto Power-Off | 5, 15, 30, 60 minutes, none |
| Operating Temperature | 32 to 104°F (0 to 40°C); ≤90% RH |
| Storage Temperature | -4 to 104° F (-20 to 50°C); 0 to 90% RH |
| Low Battery Indication (Typical) | 6.8 V |
| Battery Life (Typical) | 16 hours using alkaline battery (at 1 kHz with 100 Ω DUT, backlight off), 6 hours using Ni-MH |
| Power Consumption (Typical) | 28 mA (under full power battery) for operation/11 μA after power-off |
| Power Requirements | 9 V battery or ext. AC adapter: DC 12 Vmin to 15 Vmax (load 50 mA minimum) |
| Dimensions | 7.5 x 3.5 x 1.6" (190 x 90 x 41 mm) |
| Weight | 0.767 lbs (348 g) without battery |
| Safety | EN61010-1:2001, EU Low Voltage Directive 2006/95/EC |
| Electromagnetic Compatibility | Meets EMC Directive 2004/108/EC, EN61326-1:2006 |
