- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Features a NEMA 4 (IP65), powder-coated aluminum, polycarbonate, urethane, and stainless steel.
Features a NEMA 4 (IP65), powder-coated aluminum, polycarbonate, urethane, and stainless steel.
The RCTN has three analog outputs available to send signals to peripheral devices (such as loop–powered remote indicators, controllers and similar equipment).
| Enclosure | NEMA 4 [IP-65] Powder coated aluminum, polycarbonate, urethane and stainless steel |
| Power Requirements* *Standard with every RCTN transmitter |
115/230 V AC ±15% 50/60 HZ 25 W maximum 20 to 28 V DC 15 W maximum |
| Ambient Temperature | 14 to 158°F (-10 to 70°C) |
| Configuration | Four-button HMI or RCT console configuration |
| Display | 4 line x 20 character Alpha-numeric Dot matrix LED backlighting |
| RTD Input | Standard (1 input) Built-in 100 Ω platinum RTD within the sensor body |
| Optional | Auxiliary (1 input) Additional 100 Ω 3-wire platinum RTD input Note: The platinum RTD input for the secondary RTD is used by customers who want to be able to calibrate their RTD. |
| Analog I/O Outputs | Three 4 to 20 mA (0 to 22 mA capable) Maximum load of 500Ω Approximately 16 bit resolution outputs Assignable mass flow, volume, density, temperature, concentration, PID, and similar measurements User-defined fault condition output value anywhere in the 0 to 22 mA range Inputs: Two 0 to 5 V DC inputs 20k Ω input impedance Approximately 12 bit resolution |
| Auxiliary Power | Internal 24 V DC supply 100 mA maximum (for batching functions, frequency output channel, and similar applications) |
| Frequency/Pulse Output | One open collector transistor User configurable as rate (3 kHz maximum output) Accumulator 0 to 10 Hz PMW with 1 kHz carrier User assignable to rate any totalizer, PID, temperature, density, concentration, or other similar measurements |
| Digital I/O Outputs | Four 5 to 28 V DC 50 mA maximum current draw (external pullup resistor required) Inputs: Four 5 to 24 V DC with 1 k Ω impedance |
| Industrial Communication | Modular port |
| Standard Modbus | RTU (EIA - 485/RS485) |
| Optional Module Modbus | TCP/IP and Ethernet/IP |
| Standard Configuration Port | USB 2.0 interface (through a mini-B receptacle) for RCT console software |
| Alarms | Six hi/lo alarms Alarm status on display by default Assignable to digital I/O (limit 2 or 4) and available via digital communications |
| Transmission Distance | Up to 100' (30 m) Contact the factory if a longer length is needed |
| Other Functions | Batch control and PID control User configuration of all I/O functions |
| Measurement | Forward and reverse mass flow Total, density, temperature, concentration, volumetric flow, and total (derived) |
| Enclosure | NEMA 4 [IP-65] Powder coated aluminum, polycarbonate, urethane and stainless steel |
| Power Requirements* *Standard with every RCTN transmitter |
115/230 V AC ±15% 50/60 HZ 25 W maximum 20 to 28 V DC 15 W maximum |
| Ambient Temperature | 14 to 158°F (-10 to 70°C) |
| Configuration | Four-button HMI or RCT console configuration |
| Display | 4 line x 20 character Alpha-numeric Dot matrix LED backlighting |
| RTD Input | Standard (1 input) Built-in 100 Ω platinum RTD within the sensor body |
| Optional | Auxiliary (1 input) Additional 100 Ω 3-wire platinum RTD input Note: The platinum RTD input for the secondary RTD is used by customers who want to be able to calibrate their RTD. |
| Analog I/O Outputs | Three 4 to 20 mA (0 to 22 mA capable) Maximum load of 500Ω Approximately 16 bit resolution outputs Assignable mass flow, volume, density, temperature, concentration, PID, and similar measurements User-defined fault condition output value anywhere in the 0 to 22 mA range Inputs: Two 0 to 5 V DC inputs 20k Ω input impedance Approximately 12 bit resolution |
| Auxiliary Power | Internal 24 V DC supply 100 mA maximum (for batching functions, frequency output channel, and similar applications) |
| Frequency/Pulse Output | One open collector transistor User configurable as rate (3 kHz maximum output) Accumulator 0 to 10 Hz PMW with 1 kHz carrier User assignable to rate any totalizer, PID, temperature, density, concentration, or other similar measurements |
| Digital I/O Outputs | Four 5 to 28 V DC 50 mA maximum current draw (external pullup resistor required) Inputs: Four 5 to 24 V DC with 1 k Ω impedance |
| Industrial Communication | Modular port |
| Standard Modbus | RTU (EIA - 485/RS485) |
| Optional Module Modbus | TCP/IP and Ethernet/IP |
| Standard Configuration Port | USB 2.0 interface (through a mini-B receptacle) for RCT console software |
| Alarms | Six hi/lo alarms Alarm status on display by default Assignable to digital I/O (limit 2 or 4) and available via digital communications |
| Transmission Distance | Up to 100' (30 m) Contact the factory if a longer length is needed |
| Other Functions | Batch control and PID control User configuration of all I/O functions |
| Measurement | Forward and reverse mass flow Total, density, temperature, concentration, volumetric flow, and total (derived) |
