EMIT 50766 Smartlog V5 without Software

Downloads: manual

This system is designed for fast, frequent and accurate testing of electrostatic discharge of personnel grounding items.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Model: 50780

Verifies the functionality of an operator’s wrist strap and footwear, logs the test results, and controls access to an ESD Protected Area.

Learn More

Features

May be used as a stand alone or networked tester
Improved stainless steel enclosure; barcode scanner accommodates larger/wider employee badges
Wrist Strap Test Limit; 750 kilohm low wrist strap test limit added for ANSI/ESD S20.20 conformance
Embedded Ethernet module for network communication
Embedded CCD barcode scanner
Foot plate detection circuit
Improved relay activation speed
Multiple test options available:
- wrist strap only
- footwear only
- wrist strap and footwear
- wrist strap or footwear
- user choice
- footwear with wrist strap optional
Independently tests the resistance path limits of a worn wrist strap and both worn ESD footwear within 2 seconds
Enforces test requirements specific to the operator

SMARTLOG V5™ Operating Voltage	100-240 VAC, 50/60 Hz
Operating Temperature	70°F to 85°F (21°C to 30°C) for 1 Gigohm test limit 41°F to 85°F (5°C to 30°C) for all other test limits
Environmental Requirements	Indoor use only at altitudes less than 6500 ft. (2km) Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C) Maximum relative humidity of 50% at 1 Gigohm setting
Dimensions	7.9" x 5.8" x 1.9" (20.1cm x 14.7cm x 4.8cm)
Weight	2.0 lbs (0.9 kg)
Test Accuracy	±20% for 1 gigohm footwear test limit ±10% for all other test limits
Test Switch Voltage	5 VDC @ open circuit
Wrist Strap and Footwear Test Voltage	30 VDC @ open circuit
Test current is limited by resistors and varies on the test range setting (100 kilohms - 1 gigohm)
Memory Capacity*
Test ID Length	Test Transactions
4	16,100
5	15,300
6	14,600
7	14,000
8	13,400
9	12,900
10	12,400
11	11,900
12	11,500
13	11,100
14	10,700
15	10,400
16	10,100
*This only applies should the SmartLog V5 lose communication with the TEAM5 Software. Test transactions are automatically polled from the SmartLog's memory when connected to TEAM5
DUAL INDEPENDENT FOOT PLATE	Dimensions 14.0" x 16.0" x 0.9" (35.6cm x 40.1cm x 2.3cm) Weight 7.5 lbs (3.4 kg)

manual for the EMIT 50766 Smartlog V5 without Software

Features

May be used as a stand alone or networked tester
Improved stainless steel enclosure; barcode scanner accommodates larger/wider employee badges
Wrist Strap Test Limit; 750 kilohm low wrist strap test limit added for ANSI/ESD S20.20 conformance
Embedded Ethernet module for network communication
Embedded CCD barcode scanner
Foot plate detection circuit
Improved relay activation speed
Multiple test options available:
- wrist strap only
- footwear only
- wrist strap and footwear
- wrist strap or footwear
- user choice
- footwear with wrist strap optional
Independently tests the resistance path limits of a worn wrist strap and both worn ESD footwear within 2 seconds
Enforces test requirements specific to the operator

SMARTLOG V5™ Operating Voltage	100-240 VAC, 50/60 Hz
Operating Temperature	70°F to 85°F (21°C to 30°C) for 1 Gigohm test limit 41°F to 85°F (5°C to 30°C) for all other test limits
Environmental Requirements	Indoor use only at altitudes less than 6500 ft. (2km) Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C) Maximum relative humidity of 50% at 1 Gigohm setting
Dimensions	7.9" x 5.8" x 1.9" (20.1cm x 14.7cm x 4.8cm)
Weight	2.0 lbs (0.9 kg)
Test Accuracy	±20% for 1 gigohm footwear test limit ±10% for all other test limits
Test Switch Voltage	5 VDC @ open circuit
Wrist Strap and Footwear Test Voltage	30 VDC @ open circuit
Test current is limited by resistors and varies on the test range setting (100 kilohms - 1 gigohm)
Memory Capacity*
Test ID Length	Test Transactions
4	16,100
5	15,300
6	14,600
7	14,000
8	13,400
9	12,900
10	12,400
11	11,900
12	11,500
13	11,100
14	10,700
15	10,400
16	10,100
*This only applies should the SmartLog V5 lose communication with the TEAM5 Software. Test transactions are automatically polled from the SmartLog's memory when connected to TEAM5
DUAL INDEPENDENT FOOT PLATE	Dimensions 14.0" x 16.0" x 0.9" (35.6cm x 40.1cm x 2.3cm) Weight 7.5 lbs (3.4 kg)