Extech CG104 Coating Thickness Tester

Downloads: datasheet manual

For non-destructive measurements of the thickness of coatings on ferrous and non-ferrous substrates.

Yes, I would like to add a Calibration Certificate (Model CERTICTG1) for only $270.00 USD

Yes, I would like to add a Calibration Certificate (Model CERTICTG1) for only $270.00 USD

Recommended Accessories

Features

Dual technology provides automatic recognition of ferrous (iron and steel) and non-ferrous (copper, aluminum, zinc, bronze, brass, etc) substrates
Magnetic induction for ferrous substrates
Eddy current measurement for non-ferrous substrates
180° reversible LCD display with LED backlight
Substrate zeroing and two-point calibration function
Audible high/low limit alarms
Record/Recall Min/Max/Average readings
Store/recall up to 255 measurements
Auto Hold freezes the reading on the display
Auto power off and low battery indicator

Measuring Range	Ferrous: 0 to 2000µm (0 to 80.0mils); Non-ferrous: 0 to 1000µm (0 to 40.0mils)
Accuracy	±4 dgt. (0 to 7.8mils)/±10 dgt. (0 to 199µm); ±3% (7.9 to 39.0mils)/±3% (200 to 1000µm); ±5% (39.1 to 80.0mils); ±5% (1001 to 2000µm)
Dimensions	4.1 x 2.2 x 1.1" (105 x 55 x 27mm)
Weight	2.8oz (80g)

Coating Thickness Tester
Calibration Standards (one ferrous plate, one non-ferrous plate, and one standard coating plate film)
Wrist Strap
Soft Carrying Case
2 x AAA Batteries

datasheet for the Extech CG104 Coating Thickness Tester manual for the Extech CG104 Coating Thickness Tester

Click on a category to view a selection of compatible accessories with the Extech CG104 Coating Thickness Tester.

Compatible with the CG104 coating thickness tester, this calibration references kit comes with a ferrous plate, a non-ferrous plate, and a film.

Features

Dual technology provides automatic recognition of ferrous (iron and steel) and non-ferrous (copper, aluminum, zinc, bronze, brass, etc) substrates
Magnetic induction for ferrous substrates
Eddy current measurement for non-ferrous substrates
180° reversible LCD display with LED backlight
Substrate zeroing and two-point calibration function
Audible high/low limit alarms
Record/Recall Min/Max/Average readings
Store/recall up to 255 measurements
Auto Hold freezes the reading on the display
Auto power off and low battery indicator

Measuring Range	Ferrous: 0 to 2000µm (0 to 80.0mils); Non-ferrous: 0 to 1000µm (0 to 40.0mils)
Accuracy	±4 dgt. (0 to 7.8mils)/±10 dgt. (0 to 199µm); ±3% (7.9 to 39.0mils)/±3% (200 to 1000µm); ±5% (39.1 to 80.0mils); ±5% (1001 to 2000µm)
Dimensions	4.1 x 2.2 x 1.1" (105 x 55 x 27mm)
Weight	2.8oz (80g)

Coating Thickness Tester
Calibration Standards (one ferrous plate, one non-ferrous plate, and one standard coating plate film)
Wrist Strap
Soft Carrying Case
2 x AAA Batteries

datasheet for the Extech CG104 Coating Thickness Tester manual for the Extech CG104 Coating Thickness Tester

Click on a category to view a selection of compatible accessories with the Extech CG104 Coating Thickness Tester.