With select nominal increments in mPa units, from 4 to 260mPa, this hydraulic deadweight tester is suitable for a wide range of testing applications.
With select nominal increments in mPa units, from 4 to 260mPa, this hydraulic deadweight tester is suitable for a wide range of testing applications.
This hydraulic tester has mass set that can be trimmed to local gravity FOC.
Features
Pressure Ranges | 500 to 30,000psi, or 40 to 2,000bar, or 4 to 200mPa, or 40 to 2,000kgf/cm2 |
Standard Weight Material | Series 3 non-magnetic, austenitic, stainless steel |
Weight Density | 7.8g/cm3 |
Piston Material | Tungsten carbide with nickel binder |
Cylinder Material | Tungsten carbide with cobalt binder |
Thermal Coefficient of Expansion | 11ppm/°C |
Test Port Adapters | 9/16 - 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP |
Reservoir Volume | 235cc (14.3in3) |
Intensifier Ratio | 7 to 1 |
Seal Materials | Nitrile |
Operating Fluid | Dioctyl Sebacate (DOS), our reference 55-600 |
Click on a category to view a selection of compatible accessories with the Fluke P3840-MPA Hydraulic Deadweight Tester, 4 to 260mPa.
Pressure Ranges | 500 to 30,000psi, or 40 to 2,000bar, or 4 to 200mPa, or 40 to 2,000kgf/cm2 |
Standard Weight Material | Series 3 non-magnetic, austenitic, stainless steel |
Weight Density | 7.8g/cm3 |
Piston Material | Tungsten carbide with nickel binder |
Cylinder Material | Tungsten carbide with cobalt binder |
Thermal Coefficient of Expansion | 11ppm/°C |
Test Port Adapters | 9/16 - 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP |
Reservoir Volume | 235cc (14.3in3) |
Intensifier Ratio | 7 to 1 |
Seal Materials | Nitrile |
Operating Fluid | Dioctyl Sebacate (DOS), our reference 55-600 |
Click on a category to view a selection of compatible accessories with the Fluke P3840-MPA Hydraulic Deadweight Tester, 4 to 260mPa.