Klein Tools NCVT1XTKIT Offers

The non-contact voltage tester (Cat. No. NCVT1XT) detects voltage 70 to 1 000 V AC, is dustproof and waterproof with an IP67 rating, and has durable 9.8' (3 m) drop protection. The GFCI receptacle tester (Cat. No. RT210) is designed to detect the most common wiring problems in standard and GFCI receptacles.

Features

• Voltage Tester provides non-contact detection of 70 to 1000 V AC in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires
• Durable tester is dustproof and waterproof with an IP67 rating and 9.8' (3 m) drop protection
• Volt Pen with high intensity, bright green LED indicates the tester is powered on
• When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound
• CAT IV 1000 V safety rating, low battery indicator, and easy access to battery compartment
• GFCI tester detects the most common wiring problems in standard and GFCI receptacles: open ground, reverse polarity, open hot, open neutral, hot/ground reversed
• CAT II 300 V safety rating, works on GFCI outlets, and confirms operation of the ground fault protective device
• NCV tester is not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low-voltage mode
• Important Notes: Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury. Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling. Always consult a qualified electrician to resolve wiring problems