Kyoritsu 2413R True RMS Leakage Clamp Meter, 1000A/0.1mA

Downloads: datasheet manual

True RMS enables an accurate measurement of distorted waveforms. Measurement from 0.1mA up to 1000A AC.

Yes, I would like to add a Calibration Certificate (Model CERTICM1) for only $105.00 USD

Yes, I would like to add a Calibration Certificate (Model CERTICM1) for only $105.00 USD

Features

Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement
Frequency filter switch to eliminate the effect of the harmonics
2 way analogue output terminal: AC current detected by transformer jaws is converted to AC and DC voltage
Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder
Peak hold function (response time is selectable 10 or 100ms)
Data hold function
Display backlight (automatically off)
International safety standard IEC61010-1 CAT.III 300V

AC A (50/60Hz)
Ranges	200mA 2A 20A 200A 1000A
Accuracy	200mA/2/20A: ±2.5%rdg ±5dgt 200A, 0 to 500A: ±3.0%rdg ±5dgt 501 to 1000A: ±5.5%rdg
AC A (WIDE)
Ranges	200mA 2A 20A 200A 1000A
Accuracy	200mA/2/20A: ±1.8%rdg ±5dgt 200A, 0 to 500A: ±2.0%rdg ±5dgt 501 to 1000A: ±5.0%rdg
General Specifications
Conductor Size	ø68mm max.
Frequency Response	40Hz to 1kHz
Crest Factor	3.0 or less
Power Source	6F22 9V Battery
Continuous Measuring Time	Approx. 60 hours
Dimensions	250 x 130 x 50 mm
Weight	Approx. 570 g

datasheet for the Kyoritsu 2413R True RMS Leakage Clamp Meter, 1000A/0.1mA manual for the Kyoritsu 2413R True RMS Leakage Clamp Meter, 1000A/0.1mA

Features

Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement
Frequency filter switch to eliminate the effect of the harmonics
2 way analogue output terminal: AC current detected by transformer jaws is converted to AC and DC voltage
Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder
Peak hold function (response time is selectable 10 or 100ms)
Data hold function
Display backlight (automatically off)
International safety standard IEC61010-1 CAT.III 300V

AC A (50/60Hz)
Ranges	200mA 2A 20A 200A 1000A
Accuracy	200mA/2/20A: ±2.5%rdg ±5dgt 200A, 0 to 500A: ±3.0%rdg ±5dgt 501 to 1000A: ±5.5%rdg
AC A (WIDE)
Ranges	200mA 2A 20A 200A 1000A
Accuracy	200mA/2/20A: ±1.8%rdg ±5dgt 200A, 0 to 500A: ±2.0%rdg ±5dgt 501 to 1000A: ±5.0%rdg
General Specifications
Conductor Size	ø68mm max.
Frequency Response	40Hz to 1kHz
Crest Factor	3.0 or less
Power Source	6F22 9V Battery
Continuous Measuring Time	Approx. 60 hours
Dimensions	250 x 130 x 50 mm
Weight	Approx. 570 g