The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in).
The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in).
The gauges include MESUR™ Lite data acquisition software, for tabulation of continuous or individual data points. One-click export to Excel allows for further data manipulation.
Features
Force Capacity | 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1,000 x 0.5 N, 1 x 0.0005 kN | |
Accuracy | ±0.2% of full scale | |
Wire Diameter Range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] | |
Minimum Sample Length | 6.0 in [152 mm], excluding termination | |
Max. Elongation | 1.15 in [29.2 mm] | |
Power | AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low. Battery life: Backlight on/off: up to 7/24 hours of continuous use | |
Sampling Rate | 7,000 Hz | Outputs | USB / RS-232: Configurable up to 115,200 baud Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 VDC, ±0.25% of full scale at capacity |
Safe Overload | 150% of full scale (display shows "OVER" at 110% and above) | |
Weight | 16.1 lb [7.3 kg] |
Click on a category to view a selection of compatible accessories with the Mark-10 WT3-201 Manual Wire Crimp Pull Tester, 200 lbF, 3200 ozF, 100 kgF, 1000 N, 1 kN.
Force Capacity | 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1,000 x 0.5 N, 1 x 0.0005 kN | |
Accuracy | ±0.2% of full scale | |
Wire Diameter Range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] | |
Minimum Sample Length | 6.0 in [152 mm], excluding termination | |
Max. Elongation | 1.15 in [29.2 mm] | |
Power | AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low. Battery life: Backlight on/off: up to 7/24 hours of continuous use | |
Sampling Rate | 7,000 Hz | Outputs | USB / RS-232: Configurable up to 115,200 baud Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 VDC, ±0.25% of full scale at capacity |
Safe Overload | 150% of full scale (display shows "OVER" at 110% and above) | |
Weight | 16.1 lb [7.3 kg] |
Click on a category to view a selection of compatible accessories with the Mark-10 WT3-201 Manual Wire Crimp Pull Tester, 200 lbF, 3200 ozF, 100 kgF, 1000 N, 1 kN.