- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
The WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF (1 kN) for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing.
The WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF (1 kN) for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing.
The tester accommodates most insulation types and wire sizes up to AWG 3 (0.25 in [6.3 mm] OD). Samples can be sent to Mark-10 for evaluation prior to purchase. Auto-start automatically begins the test when the wire sample has been loaded. When the sample breaks, the tester can auto-reverse, output the peak force, store the peak force, and zero the display automatically, thereby increasing testing throughput. Further testing efficiency is achieved via the available Profiles function, through which multiple test setups may be saved and recalled as required.
Features
Applications
| Accuracy | ±0.2% of full scale |
| Wire Diameter Range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] |
| Simple Length Range | Minimum 6.5 in [165 mm], excluding termination |
| Max. Elongation | 1.7 in [43 mm] |
| Speed Range | Test speed: 0.4 - 12.0 in/min [10 - 300 mm/min] Approach/reverse speed: 13.0 - 96.0 in/min [325 - 2,400 mm/min] |
| Speed Setting Accuracy | ±0.2% |
| Speed Variation with Load | ±0% [Stepper motor driven] |
| Power | Universal input 80-240 VAC, 50/60 Hz |
| Sampling Rate | 7,000 Hz |
| Outputs | USB / RS-232: Configurable up to 115,200 baud Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog:±1 VDC at capacity, ±0.25% of full scale General purpose: Three open drain outputs, one input Set points: Three open drain lines |
| Safe Overload | 150% of full scale (display shows "OVER" at 110% and above) | Weight | 26.5 lb [12.0 kg] |
Click on a category to view a selection of compatible accessories with the Mark-10 WT3-201M Motorized Wire Crimp Pull Tester, 200 lbF, 3200 ozF, 100 kgF, 1000 N, 1 kN.
| Accuracy | ±0.2% of full scale |
| Wire Diameter Range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] |
| Simple Length Range | Minimum 6.5 in [165 mm], excluding termination |
| Max. Elongation | 1.7 in [43 mm] |
| Speed Range | Test speed: 0.4 - 12.0 in/min [10 - 300 mm/min] Approach/reverse speed: 13.0 - 96.0 in/min [325 - 2,400 mm/min] |
| Speed Setting Accuracy | ±0.2% |
| Speed Variation with Load | ±0% [Stepper motor driven] |
| Power | Universal input 80-240 VAC, 50/60 Hz |
| Sampling Rate | 7,000 Hz |
| Outputs | USB / RS-232: Configurable up to 115,200 baud Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog:±1 VDC at capacity, ±0.25% of full scale General purpose: Three open drain outputs, one input Set points: Three open drain lines |
| Safe Overload | 150% of full scale (display shows "OVER" at 110% and above) | Weight | 26.5 lb [12.0 kg] |
Click on a category to view a selection of compatible accessories with the Mark-10 WT3-201M Motorized Wire Crimp Pull Tester, 200 lbF, 3200 ozF, 100 kgF, 1000 N, 1 kN.
