The Veris AC Kilowatt-Hour Transducer incorporates one split-core AC current sensor and two voltage leads and outputs a signal proportional to kilowatts of power (consumption). Accepting an input primary voltage of 208 to 480VAC rms, this transducer requires S-UCC-M001 or S-UCC-M006 Pulse Input Adapter.
The Veris AC Kilowatt-Hour Transducer incorporates one split-core AC current sensor and two voltage leads and outputs a signal proportional to kilowatts of power (consumption). Accepting an input primary voltage of 208 to 480VAC rms, this transducer requires S-UCC-M001 or S-UCC-M006 Pulse Input Adapter.
Accepting an input primary voltage of 208 to 480 Volts AC rms, this transducer requires a Pulse Input Adapter. Because these sensors tie directly into the line, they should be used only by qualified personnel. NOTE: Not recommended for use with variable frequency drives.
Features
Frequency | 50 to 60Hz |
Accuracy | ±1% (3-Phase Model Conforms to ANSI C12.1 Metering Standards) |
CT Range | 0 to 300 Amp |
Circuit Connection | 3 or 4-Wire |
Maximum Output Current | 100mA at 24VAC/DC |
Operating Temperature Range | 0 to 60°C (32 to 140°F) |
Operating Humidity Range | 0 to 95% RH, Non-Condensing |
Output Signal to HOBO Energy Logger | Pulse (Normally Open Opto-FET) |
Pulse Width | 200 msec |
Frequency | 50 to 60Hz |
Accuracy | ±1% (3-Phase Model Conforms to ANSI C12.1 Metering Standards) |
CT Range | 0 to 300 Amp |
Circuit Connection | 3 or 4-Wire |
Maximum Output Current | 100mA at 24VAC/DC |
Operating Temperature Range | 0 to 60°C (32 to 140°F) |
Operating Humidity Range | 0 to 95% RH, Non-Condensing |
Output Signal to HOBO Energy Logger | Pulse (Normally Open Opto-FET) |
Pulse Width | 200 msec |