Phase II MET-HRC Mini MET Hardness Tester for Rockwell C Scale, Steel Only

Incorporating Ultrasonic UCI technology, the Phase II MET-HRC is able to test the hardness of very thin and small workpieces that could otherwise not be tested accurately with a portable device. The PHASE II ultrasonic/dynamic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part.

The Phase II MET series of portable hardness testers offers a model that include a dynamic probe for easy, quick hardness testing of parts with a mass greater than 5kg. A hardness testing method based on the measurement of the frequency shift of a resonating rod caused by the essentially elastic nature of the finite area of contact between the indenter and the test piece during the penetration. Described as a hardness testing practice using a calibrated instrument by pressing a resonating rod with a Vickers style Diamond indentor with a fixed force against the surface of the part to be tested.

Functions:

• Easy To Read Menu Operation
• Large LCD Display w/ Back Light
• USB Interface
• Automatic Conversions to: Brinell, Rockwell C, Rockwell B, Vickers and Leeb
• Automatic Mean Value
• Data Archive Capacity

• Base Instrument
• 10N (1kgf) Hand-Held Probe - U1 & UD models
• Dynamic "D" Leeb Impact Device - UD model only
• Calibrated Test Blocks:
  Model MET-U1A 2pc HRC Test Blocks
  Model MET-UD 2pc HRC Test Blocks 1pc Leeb Test Block
• USB Ouput Cable
• Custom Carry Case
• Battery Charger
• Operation Manual