PIECAL Milliamp Loop Diagnostic Calibrator

With the PIECAL 334Plus you can check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp DC loop. It can be used at any access point in your loop. Source & Read 0.000 to 24.000 mA, Simulate a 2 Wire Transmitter or use the PIECAL 334Plus to simultaneously power your 2 Wire Transmitter and measure its output.

Features

• Simulate a 2 Wire Transmitter or use the PIECAL 334Plus to simultaneously power your 2 Wire Transmitter and measure its output.
• Easy to read Turn on backlight & easily see the display in dark areas of the plant.
• Troubleshoot loop problems Quickly diagnose ground fault and current leakage with the patented loop diagnostic technology (US Patent# 7,248,058).
• Source milliamps Calibrate recorders, digital indicators, stroke valves or any instruments that get their input from a 4 to 20 mA loop. Easily set any value quickly to within 0.001 mA with the adjustable digital potentiometer "DIAL" or use preset 4.000 mA (0.00%) and 20.000 mA (100.00%) EZ-CHECK™ settings.
• Automatic output stepping & ramping Press & hold the dial to automatically step from 4 to 20 in 2, 3 or 5 steps or choose a continuous ramp.
• Calibrate using loop power Check loop wiring and receivers by using the PIECAL 334Plus in place of a 2 Wire transmitter. Uses any loop power from 2 to 100 V DC.
• Read loop currentCheck controller outputs or measure the milliamp signal anywhere in the loop. The PIECAL 334Plus measures 0.000 to 52.000 mA (-25.00 to 300.00%) agnals with greater accuracy than a typical multimeter.
• Power & measure 2 wire transmitters The PIECAL 334Plus can simultaneously output 24V DC to power any and all devices in a process loop using the internal batteries and internal switching power supply, while measuring the output of a 2 Wire Transmitter andany other loop devices. Powers HART™ transmitters with built-in 250 ohm resistor simplifying hookups with HARTcommunicators.
• Read DC volts The PIECAL 334Plus can measure from -99.99 to +99.99 VDC with 0.01 Volt resolution. Use it to check loop power supplies, I/V converters, 1 to 5 Volt signals, and other voltages making it unnecessary to carry a multimeter.
• Evolutionary design PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 334Plus improves upon other brands by including a rubber boot, tilt stand, backlit display with larger digits, rugged switches and a battery compartment for fast battery changes

Specifications

• Operating Temperature: -20 to 60 °C (-5 to 140 °F)
• Storage Temperature: -30 to 60 °C (-22 to 140 °F)
• Relative Humidity Range: 10% ≤RH ≤90% (0 to 35 °C), Non-condensing; 10% ≤RH ≤70% (35 to 60 °C), Non-condensing
• Batteries: Four "AA" Alkaline 1.5V (LR6)
• Optional AC Adaptors: 120 VAC 50/60 Hz [Part # 020-0100]240 VAC 50/60 Hz [Part # 020-0101]optional NiMh Rechargeable battery kit 120 VAC for North America Only; charger, four NiMh batteries, AC & DC cords [Part # 020-0103]
• Low Battery: Indication with nominal 1 hour of operation left
• Protection Against Misconnection: Over-voltage protection to 135 vrms (rated for;30 seconds) or 240 vrms (rated for 15 seconds)
• Display: High contrast graphic backlit LCD with 0.315" (8.0 mm) high digits
• Dimensions: 5.63 x 3.00 x 1.60 in, 143 x 76 x 41mm
• Weight: 12.1 ounces, 0.34 kg (including boot & batteries)