Measuring 12 x 18", these Dri-Shield® aluminized moisture barrier bags are ideal for storing ESD- and moisture-sensitive items. In addition to being heat sealable, these bags feature ESD and moisture warning symbols for added convenience.
Measuring 12 x 18", these Dri-Shield® aluminized moisture barrier bags are ideal for storing ESD- and moisture-sensitive items. In addition to being heat sealable, these bags feature ESD and moisture warning symbols for added convenience.
This aluminized moisture barrier bag is designed to provide packaging for ESD and moisture sensitive items, both inside and outside an ESD protected area. The bags are heat sealable and suitable for vacuum packaging. Bags are printed with ESD and moisture warning symbols and a lot code for traceability. SCS Moisture Barrier Bags Dri-Shield 2000 are manufactured from a laminate of multiple layers of aluminized polyester and polyethylene. Polyester provides puncture resistance. Metal layers are intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of electric field while providing moisture protection.
Features
Moisture Vapor Transmission Rate (MVTR) | <0.03grams/100sq. in./24hrs MIL-STD-3010C Method 3030 |
Tensile Strength | 7800psi, 54MPa ASTM D882 |
Puncture Resistance | 20lbs, 89 N MIL-STD-3010 Method 2065 |
Seal Strength | 15lbs, 66 N ASTM D882 |
Thickness | 3.6mils, 0.091mm +/-10% MIL-STD-3010 Method 1003 |
Marking Adhesion | Pass IPC-TM-650 2.4.1 |
ESD Shielding | <10nJ ANSI/ESD STM11.31 |
Heat Sealing Temperature | 300 to 400°F (140 to 204°C) |
Heat Sealing Time | 0.6 to 4.5 seconds |
Heat Sealing Pressure | 30 to 70psi, 206 to 482kpa |
Moisture Vapor Transmission Rate (MVTR) | <0.03grams/100sq. in./24hrs MIL-STD-3010C Method 3030 |
Tensile Strength | 7800psi, 54MPa ASTM D882 |
Puncture Resistance | 20lbs, 89 N MIL-STD-3010 Method 2065 |
Seal Strength | 15lbs, 66 N ASTM D882 |
Thickness | 3.6mils, 0.091mm +/-10% MIL-STD-3010 Method 1003 |
Marking Adhesion | Pass IPC-TM-650 2.4.1 |
ESD Shielding | <10nJ ANSI/ESD STM11.31 |
Heat Sealing Temperature | 300 to 400°F (140 to 204°C) |
Heat Sealing Time | 0.6 to 4.5 seconds |
Heat Sealing Pressure | 30 to 70psi, 206 to 482kpa |