Durable and reliable, this moisture barrier bag provides static-safe environments for electronic devices. Manufactured from a laminate of multiple layers of aluminized polyester and polyethylene, the bag is heat sealable and suitable for vacuum packaging. The polyester layer helps prevent sharp trays from puncturing the bag. ↵
Durable and reliable, this moisture barrier bag provides static-safe environments for electronic devices. Manufactured from a laminate of multiple layers of aluminized polyester and polyethylene, the bag is heat sealable and suitable for vacuum packaging. The polyester layer helps prevent sharp trays from puncturing the bag. ↵
Features
Physical Properties | |
Moisture Vapor Transmission Rate | Typical value: <0.030 grams/100 sq. in./24 hours Testing method: MIL-STD-3010C method 3030 |
Tensile Strength | Typical value: 6550 PSI, 45 MPa Testing method: ASTM D882 |
Puncture Resistance | Typical value: 30 lbs, 133 N Testing method: MIL-STD-3010 method 2065 |
Seal Strength | Typical value: 20 lbs, 89 N Testing method: ASTM D882 |
Thickness | Typical value: 7 mils, 0.007" ±10% Testing method: MIL-STD-3010 method 1003 |
Marking Adhesion | Typical value: pass Testing method: IPC-TM-650 2.4.1 Testing method: ANSI/ESD STM11.31 |
Electrical Properties | |
ESD Shielding | Typical value: <10 nJ Testing method: ANSI/ESD STM11.31 |
Surface Resistance - Interior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
Surface Resistance - Exterior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
EMI Attenuation | Typical value: 45 dB Testing method: 1 to 10 GHz |
Cleanliness | |
Silicone | Typical value: Not detected Testing method: FTIR |
Heat Sealing Conditions | |
Temperature | 400°F (204°C) |
Time | 0.6 to 4.5 seconds |
Pressure | 30 to 70 PSI, 206 to 482 KPa |
Physical Properties | |
Moisture Vapor Transmission Rate | Typical value: <0.030 grams/100 sq. in./24 hours Testing method: MIL-STD-3010C method 3030 |
Tensile Strength | Typical value: 6550 PSI, 45 MPa Testing method: ASTM D882 |
Puncture Resistance | Typical value: 30 lbs, 133 N Testing method: MIL-STD-3010 method 2065 |
Seal Strength | Typical value: 20 lbs, 89 N Testing method: ASTM D882 |
Thickness | Typical value: 7 mils, 0.007" ±10% Testing method: MIL-STD-3010 method 1003 |
Marking Adhesion | Typical value: pass Testing method: IPC-TM-650 2.4.1 Testing method: ANSI/ESD STM11.31 |
Electrical Properties | |
ESD Shielding | Typical value: <10 nJ Testing method: ANSI/ESD STM11.31 |
Surface Resistance - Interior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
Surface Resistance - Exterior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
EMI Attenuation | Typical value: 45 dB Testing method: 1 to 10 GHz |
Cleanliness | |
Silicone | Typical value: Not detected Testing method: FTIR |
Heat Sealing Conditions | |
Temperature | 400°F (204°C) |
Time | 0.6 to 4.5 seconds |
Pressure | 30 to 70 PSI, 206 to 482 KPa |