Durable and reliable, this moisture barrier bag provides static-safe environments for electronic devices. Manufactured from a laminate of multiple layers of aluminized polyester and polyethylene, the bag is heat sealable and suitable for vacuum packaging. The polyester layer helps prevent sharp trays from puncturing the bag.
Durable and reliable, this moisture barrier bag provides static-safe environments for electronic devices. Manufactured from a laminate of multiple layers of aluminized polyester and polyethylene, the bag is heat sealable and suitable for vacuum packaging. The polyester layer helps prevent sharp trays from puncturing the bag.
Features
Physical Properties | |
Moisture Vapor Transmission Rate | Typical value: <0.030 grams/100 sq. in./24 hours Testing method: MIL-STD-3010C method 3030 |
Tensile Strength | Typical value: 6550 PSI, 45 MPa Testing method: ASTM D882 |
Puncture Resistance | Typical value: 30 lbs, 133 N Testing method: MIL-STD-3010 method 2065 |
Seal Strength | Typical value: 20 lbs, 89 N Testing method: ASTM D882 |
Thickness | Typical value: 7 mils, 0.007" ±10% Testing method: MIL-STD-3010 method 1003 |
Marking Adhesion | Typical value: pass Testing method: IPC-TM-650 2.4.1 Testing method: ANSI/ESD STM11.31 |
Electrical Properties | |
ESD Shielding | Typical value: <10 nJ Testing method: ANSI/ESD STM11.31 |
Surface Resistance - Interior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
Surface Resistance - Exterior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
EMI Attenuation | Typical value: 45 dB Testing method: 1 to 10 GHz |
Cleanliness | |
Silicone | Typical value: Not detected Testing method: FTIR |
Heat Sealing Conditions | |
Temperature | 400°F (204°C) |
Time | 0.6 to 4.5 seconds |
Pressure | 30 to 70 PSI, 206 to 482 KPa |
Physical Properties | |
Moisture Vapor Transmission Rate | Typical value: <0.030 grams/100 sq. in./24 hours Testing method: MIL-STD-3010C method 3030 |
Tensile Strength | Typical value: 6550 PSI, 45 MPa Testing method: ASTM D882 |
Puncture Resistance | Typical value: 30 lbs, 133 N Testing method: MIL-STD-3010 method 2065 |
Seal Strength | Typical value: 20 lbs, 89 N Testing method: ASTM D882 |
Thickness | Typical value: 7 mils, 0.007" ±10% Testing method: MIL-STD-3010 method 1003 |
Marking Adhesion | Typical value: pass Testing method: IPC-TM-650 2.4.1 Testing method: ANSI/ESD STM11.31 |
Electrical Properties | |
ESD Shielding | Typical value: <10 nJ Testing method: ANSI/ESD STM11.31 |
Surface Resistance - Interior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
Surface Resistance - Exterior | Typical value: 1 x 104 to < 1 x 1011 ohms Testing method: ANSI/ESD STM11.11 |
EMI Attenuation | Typical value: 45 dB Testing method: 1 to 10 GHz |
Cleanliness | |
Silicone | Typical value: Not detected Testing method: FTIR |
Heat Sealing Conditions | |
Temperature | 400°F (204°C) |
Time | 0.6 to 4.5 seconds |
Pressure | 30 to 70 PSI, 206 to 482 KPa |