Specifically for professionals, this cordless heat gun handles maintenance and repair work with no generator needed and includes a heavy-duty carrying case. In addition, this heat gun has a temperature range of 120 to 930°F (50 to 500°C) and an airflow rate of up to 10.5 CFM, making it powerful enough to weld TPO.
Specifically for professionals, this cordless heat gun handles maintenance and repair work with no generator needed and includes a heavy-duty carrying case. In addition, this heat gun has a temperature range of 120 to 930°F (50 to 500°C) and an airflow rate of up to 10.5 CFM, making it powerful enough to weld TPO.
Features
Getting started
This heat gun's temperature is adjustable with the cordless hot air tool switched off by pressing any button on the back below the display. The temperature is continuously variable from 120 to 930°F (50 to 500°C), visible on the LCD control panel. The actual temperature is measured at the nozzle outlet and indicated on the display. The joystick is an input button with a plus/minus function. Briefly pressing the "+/-" joystick increases or reduces the temperature in 50° steps. Keeping the joystick pressed speeds up the temperature setting process.
After setting the temperature, the tool takes a few seconds to reach the assigned temperature (depending on speed/airflow). The set temperature will be shown on the display for 3 seconds, followed by the display showing the current actual temperature of the heat gun. The "°F/°C" symbol will flash until it reaches the selected temperature. To alter the setting, press the joystick again to increase or reduce the temperature. After switching off, the hot air tool stays on the last temperature setting.
Setting airflow rate
First, press the "airflow" button: this will cause the fan button to flash, meaning the joystick can now set the airflow rate. The airflow rate setting mode automatically disengages if the airflow rate setting does not change within five seconds. Pressing the airflow button again after setting the airflow rate closes the airflow rate setting mode. The airflow rate is variable from a minimum of 150 l/min to a maximum of 300 l/min. The maximum 300 l/min airflow rate may no longer be reachable, depending on the battery capacity indicated by the flashing bars on the LCD.
Programming mode [P]
Besides normal operating mode, this heat gun has four factory-set programs for the most common jobs. Press the "P" button to access programming mode. The number 1 is for program 1, and continuing to press the program button cycles through programs 2 to 4. Pressing the button again will return the tool to standard operation. See Preset Programs in the Specifications tab for details.
Memory function [S]
The values selected for the four programs can be changed and memorized by the device. To do this, press the program button "P" until the display shows the program you wish to change. Set the required temperature and airflow rate. The memory symbol on the LCD flashes to indicate that the selected user program has changed. To memorize this setting in the user program, press and hold down the program selector button. The memory symbol continues to flash for approximately two seconds, and the settings save once the memory symbol stays on. To return to standard operation, press the program button until the program symbol disappears from the display.
Applications
Temperature | 120 to 930°F (50 to 500°C) |
Airflow Rate | 10.5 CFM |
Preset Programs | Four customizable pre-set temperature and airflow programs Program 1: Temperature: 752°F (400°C) Airflow: 7 CFM Application: Heat-shrinking Program 2: Temperature: 572°F (300°C) Airflow: 9 CFM Application: welding plastics Program 3: Temperature: 932°F (400°C) Airflow: 9 CFM Application: joining sheeting Program 4: Temperature: 482°F (250°C) Airflow: 11 CFM Application: caw-wrapping |
Voltage | 18 V AC |
Output | 1000 W |
Motor | Type: Brush motor |
Heating Element | Ceramic |
Display | Digital LCD |
Power Supply | Rechargeable lithium-ion battery |
Thermal Cut-Out | Yes |
Dimensions | 8.86 x 2.83 x 8.03" (225 x 79.88 x 203.96 mm) |
Weight | 1.5 lbs (680.4 g), bare tool |
Click on a category to view a selection of compatible accessories with the Steinel Mobile Heat 5 Cordless Heat Gun with heavy-duty carrying case, 120 to 930°F, 10.5 CFM.
Temperature | 120 to 930°F (50 to 500°C) |
Airflow Rate | 10.5 CFM |
Preset Programs | Four customizable pre-set temperature and airflow programs Program 1: Temperature: 752°F (400°C) Airflow: 7 CFM Application: Heat-shrinking Program 2: Temperature: 572°F (300°C) Airflow: 9 CFM Application: welding plastics Program 3: Temperature: 932°F (400°C) Airflow: 9 CFM Application: joining sheeting Program 4: Temperature: 482°F (250°C) Airflow: 11 CFM Application: caw-wrapping |
Voltage | 18 V AC |
Output | 1000 W |
Motor | Type: Brush motor |
Heating Element | Ceramic |
Display | Digital LCD |
Power Supply | Rechargeable lithium-ion battery |
Thermal Cut-Out | Yes |
Dimensions | 8.86 x 2.83 x 8.03" (225 x 79.88 x 203.96 mm) |
Weight | 1.5 lbs (680.4 g), bare tool |
Click on a category to view a selection of compatible accessories with the Steinel Mobile Heat 5 Cordless Heat Gun with heavy-duty carrying case, 120 to 930°F, 10.5 CFM.