Trumeter 7932 Electronic Predetermining Counter/Timer

Downloads: datasheet manual

6 digit supertwist LCD programmable preset counter/timer with prescaler and EEPROM data storage in an IP65 DIN case.

Features

Simple programming via menu driven display
High visibility supertwist LCD display can be viewed from any angle
Backlight programmable ON, OFF or AUTO
40 years data retention with no power
Programmable decimal point up to 3 places
Operates from 85-265VAC or 10-26VDC
12VDC output to drive a sensor (when AC powered)
Opto-isolated inputs
Wide range of prescaling
Output relay contacts rated at 5A
Output can be set to latch or pulse with programmable pulse duration
Environmental protection to IP65
Standard DIN housing
CE, UL and cUL approved
2 rows of 6 digits, supertwist black on silver LCD with yellow/green LED backlight. Upper row 7mm (0.28") high indicates count, lower row 4mm (0.16") high indicates P1 preset point Also Relay Active annunciator
Preset Points are User selectable preset point 1 – 999999
40 years minimum Data Retention

Applications

Display	Black on green STN LCD, with yellow/green LED backlight
Program Storage	Erase/Write Cycles: 1,000,000 Life: 40 Years Minimum
Count Range	0 to 999999
Count Pre-Scaler	Multiplier: 0.00250 to 9.99999 Divider: 1 to 99999
Timing Accuracy	±0.3%
Inputs	High Speed: 10kHz Max (Electronic) Duty Cycle: 60:40 Max Low Speed: 30Hz Max (Contact Closure)
External Reset Response Time	Max 2mSec
UL Ratings	AC 250V Max, DC 125V Max 250V AC: 1/6 HP Max 30V DC: 5A Max
General Ratings	AC 1250VA Max, 300V AC Max 250V AC (cosø = 1): 5A Max 250V AC (cosø = 0.4): 3A Max DC 150W Max, 220V DC Max 30V DC: 5A Max 5A Resistive Load 100,000 operations 2A Resistive Load 1,000,000 operations Reaction Time: <20ms
Supply	94 to 240V AC ± 10% 50/60Hz VA Rating 4VA or 12 to 24VDC ± 10% typical current 100mA DC (Max)
Installation Category (IEC 664)	Overvoltage Category II (Pollution Degree 2)
Operating Temperature	-10 to 60°C
Storage Temperature	-20 to 70°C
Environmental Protection	IP65 (Panel Mounting) using the sealing gasket supplied (without Screw-fixed bezel). If the seal is removed, it must be replaced with a new one
Altitude	Up to 2000m
Relative Humidity	80% Max up to 31°C, decreasing to 50% Max at 40°C

datasheet for the Trumeter 7932 Electronic Predetermining Counter/Timer manual for the Trumeter 7932 Electronic Predetermining Counter/Timer

Features

Simple programming via menu driven display
High visibility supertwist LCD display can be viewed from any angle
Backlight programmable ON, OFF or AUTO
40 years data retention with no power
Programmable decimal point up to 3 places
Operates from 85-265VAC or 10-26VDC
12VDC output to drive a sensor (when AC powered)
Opto-isolated inputs
Wide range of prescaling
Output relay contacts rated at 5A
Output can be set to latch or pulse with programmable pulse duration
Environmental protection to IP65
Standard DIN housing
CE, UL and cUL approved
2 rows of 6 digits, supertwist black on silver LCD with yellow/green LED backlight. Upper row 7mm (0.28") high indicates count, lower row 4mm (0.16") high indicates P1 preset point Also Relay Active annunciator
Preset Points are User selectable preset point 1 – 999999
40 years minimum Data Retention

Applications

Display	Black on green STN LCD, with yellow/green LED backlight
Program Storage	Erase/Write Cycles: 1,000,000 Life: 40 Years Minimum
Count Range	0 to 999999
Count Pre-Scaler	Multiplier: 0.00250 to 9.99999 Divider: 1 to 99999
Timing Accuracy	±0.3%
Inputs	High Speed: 10kHz Max (Electronic) Duty Cycle: 60:40 Max Low Speed: 30Hz Max (Contact Closure)
External Reset Response Time	Max 2mSec
UL Ratings	AC 250V Max, DC 125V Max 250V AC: 1/6 HP Max 30V DC: 5A Max
General Ratings	AC 1250VA Max, 300V AC Max 250V AC (cosø = 1): 5A Max 250V AC (cosø = 0.4): 3A Max DC 150W Max, 220V DC Max 30V DC: 5A Max 5A Resistive Load 100,000 operations 2A Resistive Load 1,000,000 operations Reaction Time: <20ms
Supply	94 to 240V AC ± 10% 50/60Hz VA Rating 4VA or 12 to 24VDC ± 10% typical current 100mA DC (Max)
Installation Category (IEC 664)	Overvoltage Category II (Pollution Degree 2)
Operating Temperature	-10 to 60°C
Storage Temperature	-20 to 70°C
Environmental Protection	IP65 (Panel Mounting) using the sealing gasket supplied (without Screw-fixed bezel). If the seal is removed, it must be replaced with a new one
Altitude	Up to 2000m
Relative Humidity	80% Max up to 31°C, decreasing to 50% Max at 40°C