Verify cable performance up to 10 Gb/s with this three-pack cable and network tester advanced kit to solve network connectivity problems using frequency-based measurements. In addition, this kit includes cable and network testers with remote IDs, network cable toner and probes, power supplies, and more.
Verify cable performance up to 10 Gb/s with this three-pack cable and network tester advanced kit to solve network connectivity problems using frequency-based measurements. In addition, this kit includes cable and network testers with remote IDs, network cable toner and probes, power supplies, and more.
Provide complete documentation with this cable and network tester advanced kit capable of exporting report data to a PC to manage results and print reports. Additionally, this kit can identify switch information such as switch data rate, switch name, IP address, port number, and VLAN.
Features
Applications
Diagnostic Protocols | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
Nearest Device Diagnostics | Switch name, port number, VLAN name, advertised data rates, advertised duplex |
Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
Power Over Ethernet Diagnostics | Advertised power class (1 to 4) (SW v1.0) Advertised available power Powered pairs Diagnostics for both single and dual signatures |
Power Over Ethernet Measurements | Loaded voltage (V) Loaded power (W) |
Port Blink | Blink the light of the connected port |
Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map only Test speed: 6 seconds for lengths <229.65' (70 m) |
Cable Types | Balanced twisted-pair cabling, unshielded twisted-pair, screened twisted-pair, two-pair and/or four-pair |
Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, half crossover, full-crossover) Test speed: 1 second for lengths <393.7' (120 m) |
Length | 1000' (305 m) maximum |
Nominal Velocity of Propagation (NVP) | User settable |
Tone Generator | Generates digital tones compatible with IntelliTone probe Generates analog tones compatible with general analog probes |
Remote ID Locators | Use remote ID terminations to identify up to seven unique ports or office outlets |
Environmental Conditions | Operating temperature: 32 to 113°F (0 to 45°C) Storage temperature: -4 to 1122°F (-20 to 50°C) Operating relative humidity: 0 to 90%, 32 to 95°F (0 to 35°C); 0 to 70%, 95 to 113°F (35 to 45°C) Operating altitude: 13,123.36' (4000 m); 10,498.69' (3200 m) with AC adapter Drop: 3.28' (1 m) drop, six sides Vibration: Random, 2 g, 5 to 500 Hz |
Display | 800 x 480 color capacitive multi-touch |
Host Interface | USB type C |
Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum; Class II |
Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
Dimensions | 8.5 x 4.5" (21.59 x 11.43 cm) |
Weight | 1.38 lbs (624 g) |
Diagnostic Protocols | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
Nearest Device Diagnostics | Switch name, port number, VLAN name, advertised data rates, advertised duplex |
Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
Power Over Ethernet Diagnostics | Advertised power class (1 to 4) (SW v1.0) Advertised available power Powered pairs Diagnostics for both single and dual signatures |
Power Over Ethernet Measurements | Loaded voltage (V) Loaded power (W) |
Port Blink | Blink the light of the connected port |
Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map only Test speed: 6 seconds for lengths <229.65' (70 m) |
Cable Types | Balanced twisted-pair cabling, unshielded twisted-pair, screened twisted-pair, two-pair and/or four-pair |
Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (straight through, half crossover, full-crossover) Test speed: 1 second for lengths <393.7' (120 m) |
Length | 1000' (305 m) maximum |
Nominal Velocity of Propagation (NVP) | User settable |
Tone Generator | Generates digital tones compatible with IntelliTone probe Generates analog tones compatible with general analog probes |
Remote ID Locators | Use remote ID terminations to identify up to seven unique ports or office outlets |
Environmental Conditions | Operating temperature: 32 to 113°F (0 to 45°C) Storage temperature: -4 to 1122°F (-20 to 50°C) Operating relative humidity: 0 to 90%, 32 to 95°F (0 to 35°C); 0 to 70%, 95 to 113°F (35 to 45°C) Operating altitude: 13,123.36' (4000 m); 10,498.69' (3200 m) with AC adapter Drop: 3.28' (1 m) drop, six sides Vibration: Random, 2 g, 5 to 500 Hz |
Display | 800 x 480 color capacitive multi-touch |
Host Interface | USB type C |
Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 Hz Output: 15 V DC, 2 A maximum; Class II |
Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 32 to 104°F (0 to 40°C) |
Dimensions | 8.5 x 4.5" (21.59 x 11.43 cm) |
Weight | 1.38 lbs (624 g) |